6mm Mini DC Gear Motor-19mm Type Model KG-06P0610 Standard

Time:2021-11-29 14:47 Click:


Product description:KG-06P0610 6mm plastic planetary gearmotor -19mm type 136:1

6mm DC Gear Motor – Smallest Gear Motor Used For Lock

Low Current & High Torque Miniature Gear Motors – Flexible Manufacturing OEM – 100% Tested Before Shipping – Custom Length Cables & Connectors – Sample & Small Order Acceptable – Best Quality Control All Process.

6mm Mini DC Gear Motor – 19mm Type Performance

1. Rated Voltage: 3.0
2. No Load Speed: 235rpm
3. No Load Current: 55 mA
4. Rated Load Speed:176 rpm

5. Rated Load Current: 100 mA
6.Rated torque:30g.cm
7.Gear ratio:136:1
8.Gearmotor length:19mm
– Above specifications are subject to change without notice, just for reference and customizable according to requirements.
– Plastic output shaft is better to be used in those conditions need small torque, or of no radial load, or via coupling joint.

 6mm  Miniature Geared Motor Outline Drawing

Gearmotor dimensions
The following diagram shows the micro plastic gearmotor dimensions in mm. The planetary gearbox has a D-shaped plastic output shaft, which is 2 mm in diameter with a section that is flattened by 0.5 mm. The “D” portion of the shaft is 2.5 mm long. The motor measures 6 mm in diameter and 9.3 mm in length, and the gearbox length, labeled “L” in the diagram below, depends on the gear ratio.
Gearbox Specifications of 6mm plastic gearmotor:
Outer diameter 6mm  
Material Plastic  
Direction of rotation cc&ccw  
Gear backlash ≤3°  
Bearing Porous Bearing Rolling bearing
Axial endplay ≤0.3mm ≤0.2mm
Radial loading on output shaft ≤0.3N ≤4N
Operating temperature range -20……+85℃  
Motor specifications:
Motor specifications  
Motors(Optional) DC brush motor, Stepper motor,Coreless motor
Voltage(Optional) 3-12V
Input speed ≤30000rpm
Current 100MA max
Full range of precision gearbox, diameters 6mm,8mm,10mm,12mm,13mm,16mm,20mm,22mm,24mm,28mm,32mm,36mm,37mm,42mm,48mm, output speed 5-3000rpm,reduction ratio 5-1500, output torque 1g.cm to 50kg.cm
Typical Application:
These 6mm precision gear motors are widely used in electronic rotating mascaras, robotic mechanisms, medical equipments, etc. The gearbox is made of plastic material, RoHS compliant. The gear ratio can be adjusted as per buyers’ requirements.
Keywords:
custom dc gear motor, custom dc gear motor, 6mm miniature gearmotor, 6mm coreless motor

 

These tiny brushed DC gearmotors have a diameter of just 6 mm and weigh just over a gram, which makes them great actuators for miniature robots and very small mechanisms. They consist of a coreless motor fastened to a planetary gearbox by a small clip. The gears are made from liquid crystal polymers (LCPs), and gearbox’s nylon output shaft is compatible with our 14 mm wheels. Several gear ratios are available:

5.1:1, which has a free run speed of 13,000 RPM and stall torque of 0.3 oz-in (22 g-cm) at 6 V
26:1, which has a free run speed of 2500 RPM and stall torque of 1.5 oz-in (110 g-cm) at 6 V
136:1, which has a free run speed of 500 RPM and stall torque of 8 oz-in (550 g-cm) at 6 V
700:1, which has a free run speed of 90 RPM and stall torque of 12 oz-in (900 g-cm) at 6 V
Note: Stalling or overloading gearmotors can greatly decrease their lifetimes and even result in immediate damage. For these gearboxes, the recommended upper limit for instantaneous torque is 3.5 oz-in (250 g-cm); we strongly advise keeping applied loads well under this limit. Stalls can also result in rapid (potentially on the order of seconds) thermal damage to the motor windings and brushes; a general recommendation for brushed DC motor operation is 25% or less of the stall current.

The intended nominal operating voltage for these motors is 3 V to 6 V, though in general, these kinds of motors can be used at voltages outside this range (rotation typically starts between 0.2 V and 0.3 V). Lower voltages might not be practical, and higher voltages could start negatively affecting the life of the motor. When operating at 3 V, the free-run speed, stall torque, and stall current will all be approximately half of what they are at 6 V as these specifications scale roughly linearly with voltage.

Since the gearmotor’s output shaft is nylon, there can be small variances in the diameter from unit to unit. These variations might cause press-fit attachments like our 14 mm wheel to fit loosely in some instances. If you experience a loose fit, you could try swapping wheels or using a small dab of glue to help hold the wheel on.

Payment:
1.Payment methods : Paypal, T/T
FAQ
Q: If customized, what information should you provide?
A: You need to provide the basic specification of the motor, such as: Dimensions, Sizes Applications, Voltage, Speed and Torque. It’s better to offer application prototype drawings to us if possible.
Q: What’s your main motors?
A: Diameter 4mm~42mm Dc Micro Motor And Gear Motor, Auto Dc Motor, Electric Motor, Gear Motor, Mini Dc Motor, Brush Dc Motor, Brushless Dc Motor, Spur Gear Motor, Micro Motor, Vibration Motor Etc.

Q: What’s the main application of the micro dc motor?
A: Our mini DC motors are widely used in Home Applications, Office Equipment, Health-Care Application, Sanitation Industry, High-Class Toy, Banking System, Electronic and Electrical Tools, Automation Industry, Bank Equipments, Payment Equipments, Vending Machines, Power Door Lock, Electric Door Lock.

 Shen Zhen Ke Gu Technology Co.,Ltd, it is a high-tech private enterprise integrating research, development, production and sales of various types of miniature DC motors, precision gearbox, micro transmission of system. We also provide the drive solutions for customers from design, components manufacturing and assembly.The company strictly implements the IS9001:2015 management system.

Products are widely used in automotive,communications equipment,smart home,medical equipment, intelligent security,household appliances,western kitchen equipment,machinery and electronics and other high-end transmission structures,products are exported to more than 50 countries and regions at home and abroad.

This tiny, cylindrical gearmotor consists of a coreless brushed DC motor and a 136:1 plastic planetary gearbox. The entire assembly has a diameter of just 6 mm (0.24″) and an extremely light weight of 1.25 g (0.044 oz), making it a great actuator for miniature robots and very small mechanisms.


Kegu motor's small gearmotors are high performance for any industry. Best quality assured. OEM & ODM gear motors. Varied custom sizes geared motors for the design of your prototype applications. You can get a free gearmotor quote by using bottom form, just tell us which geared motor model your are interested or tell us the torque, speed, reduction rito, voltage, size you need of the motors with gears, and you will receive a professional support in 24 hours.

WhatsApp Tel QR code

Tel

0755-27801762

QR code